国产精品无码AV无码,蜜臀久久久久久999草草,啊灬啊别停灬啊灬快点,美女露0的无挡写真

　　Solution to emulsion of hydraulic oil in pump truck

　　1、 The quality requirements of pump truck for hydraulic oil.

　　The hydraulic system of automobile and construction machinery uses hydraulic oil as working medium. The velocity of oil in this kind of hydraulic system is not large and the pressure is high, so it is called hydrostatic transmission. The quality of hydraulic oil will affect the working reliability and service life of hydraulic system to a great extent. Generally, the quality requirements for hydraulic oil are as follows:

　　1) Suitable viscosity and good viscosity temperature performance, to ensure that the power can be accurately and sensitively transferred under the condition of the change of working temperature, and to ensure the normal lubrication of hydraulic components.

　　2) It has good anti rust and anti-oxidation security, and is not easy to oxidize and deteriorate under high temperature and high pressure, with long service life.

　　3) it has good foam resistance, so that the foam produced by oil under continuous working conditions is easy to disappear, so that the power transmission is stable and the accelerated oxidation of hydraulic oil is avoided.

　　2、 The importance of hydraulic oil to pump truck.

　　Hydraulic oil is like "blood" in human body for pump car, which provides power source for all sports. The boom system, pumping system, mixing system and cleaning system of the pump truck are all inseparable from the work of hydraulic oil.

　　However, the daily working environment of the pump truck is complex. Therefore, it is difficult to keep the hydraulic oil clean and free from environmental pollution. The most common problem of hydraulic oil is emulsification, and the biggest culprit of emulsification is "water". Today, let's talk about the causes of the emulsification of the hydraulic oil in the pump truck, and give the right medicine.

　　3、 The reason of water emulsification of pump car hydraulic oil.

　　Applicable equipment type of this solution: all pumping equipment (Zhongjing brand filter)

　　Fault phenomenon: solve the emulsification of hydraulic oil

　　Troubleshooting: there is no doubt that water is the direct cause of emulsion of hydraulic oil for concrete pump accessories. The oil change period of general hydraulic oil is recommended to be one year, and that of synthetic hydraulic oil is recommended to be three years. Other impurities such as water entering the hydraulic oil will emulsify, and it is easy to emulsify if the oil temperature exceeds 60 ℃ for a long time. At the same time, the long-term use of harsh environment is also easy to emulsify!

　　Water enters the hydraulic system for the following reasons:

　　1. The water in the air condenses due to the alternation of heat and cold, and becomes water drops and falls into the oil;

　　2. The welds and flanges of the oil tank are not sealed tightly, causing rainwater to penetrate into the oil tank;

　　3. The pump oil cylinder is damaged, and the water is brought into the hydraulic system by the piston rod;

　　4. Bring in water during cleaning, oil change and maintenance.

　　The results show that when the mixed water accounts for 0.05% ～ 0.1% of the hydraulic oil, the transparency of the oil becomes worse and turbid; when the mixed water accounts for 0.2% ～ 0.5% of the hydraulic oil, the oil turns milky white. If the oil itself has poor demulsibility, the water will not separate even if it is allowed to stand for a period of time. When there is high temperature oxide in the oil, the high temperature oxide will act as an emulsifier to accelerate the emulsification of the oil.

　　To prevent oil emulsification, we must first prevent water from entering the hydraulic system, which requires us to take some waterproof measures in use and maintenance:

　　1. Drain water in time. It is recommended to open the water valve to drain water once before each work;

　　2. Try to avoid changing oil in rainy days. If changing oil in rainy days, take measures to prevent rainwater from entering the oil tank;

　　3. During maintenance in rainy days, waterproof measures shall be taken for oil tank. In addition, when the condition is sufficient and the oil temperature is too high, water the closed cavity of the pump oil cylinder and the cooler to reduce the oil temperature and prevent high temperature oxides. With the consent of the technical department and the user, the system temperature can be reduced by reducing the displacement of the oil pump.

　　4、 Solutions and precautions.

　　For the hydraulic system of the pump truck, it is necessary to make "prevention first, replacement second". Generally, the use of each link of the pump truck should be strictly checked.

　　1. The most effective way to prevent water from entering into the hydraulic system is to keep all parts of the hydraulic system in good sealing condition.

　　2. Always open the drain valve at the bottom of the oil tank before operation every day to drain the water at the bottom of the hydraulic oil tank.

　　3. In the process of operation, avoid high temperature rise of the system, high temperature will also lead to faster emulsification of hydraulic oil.

　　4. Closely monitor the hydraulic oil pollution caused by the leakage of the hydraulic system, such as the leakage of the boom oil cylinder and the oil rod of the main oil cylinder, which will also lead to water or other pollutants into the oil cylinder.

　　5. Change the hydraulic oil, filter element and clean the hydraulic oil tank regularly. If no specific problem is found, it can only be done. After all, if the problem of hydraulic oil causes damage to hydraulic components, it is also a common thing.

　　The emulsified hydraulic oil can be recycled and reused after demulsification. Improve the efficiency of oil products and reduce costs.

　　For more information, please refer to the product catalog and cases on the company's official website. If you need product information and videos, please open the contact information - call or add a telephone wechat.